New Products

Chikara Ripstop Nylon 41g/m²
1st quality, crisp, light weight cloth at aproximately 115cm wide, suitable for general purpose and high spec applications. Probably the most used material in kite building. Flexifoil have been using this cloth exclusivly ever since they first released the Blade Mk1. The fabric is made of nylon and double sided coated, so it is very good water repellent. It is very strong and doesn't tear easily at a relative low weight (about 41 grams). The fabric feels soft and the square structure is very visible (5 x 5 mm)

Because of the huge colour range, we currently order in Chikara specifically for each customer, delivery times are naturally a little longer. Usually 4-5 day lead times on Chikara

All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a piece of cloth measuring 100cm x 153cm, 15m of purchased fabric will buy a piece of cloth 15m x 153cm.

Best Sellers

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £5.60
3 = £15.99
10 = £48.99

6mm x 1m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £8.40
3 = £23.99
10 = £74.99

6mm x 1.5m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

1st Quality Ripstop Nylon

Please contact us for colours swatches.

Roll width 153cm..

Mirai Ripstop Nylon 48g/m² - 1st quality, crisp, light weight cloth at aproximately 153cm wide, suitable for general purpose and high spec applications. Mirai is the choice of the famous Peter Lynn Kites and has had many years of astounding success All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a peice of cloth measuring 100cm x 153cm

Ozone Flow

The Highwaymen eShop | Power Kites | Quad Line Power Kites | Ozone | Ozone Flow

Ozone Flow

The Flow is Ozone's mid-high performance fixed bridle traction kite and represents a new dimension in buggy, snow-kiting and land-boarding. In designing the Cult's replacement, Ozone has delivered a premium calibre kite with great stability, bags of performance, and an unrivalled price tag. With a higher aspect ratio than the Cult, the Flow is more efficient, faster & able to generate more power per size. Super smooth power delivery, agile, precise and always predictable, the Flow sets a new benchmark in the satisfaction of "wind addiction". With four sizes available, the Flow covers a huge range of wind conditions for buggy and board riders who are just getting into kite traction, as well as the most demanding and experienced power kiters. Available with either handles or bar set-up.

The 2.0m² is about as much fun as you can hope to have with a small kite. Massive top end wind range for high-speed balls out buggy runs and just the right amount of challenge for anyone with ambition. Try flying on a bar as the kite boarding trainer of choice.

The 3.0m² is the ideal entry point in the range for the land locked kiter generating power early on in the wind range while always being easy to control. Quite possibly the perfect introduction to land boarding.

The 4.0m² has the bottom end power needed in the lighter winds likely to be encountered by novice snow kiters. This is also a great mid-range buggy engine or land board motor.

The 5.0m² is the one to beat in is this category, with light wind performance for effortless traction and an upper limit the pros will just keep pushing.

All Ozone kites are manufactured in Ozone's factory in Vietnam and built to the same exacting standards for which their World-class paragliders and technical power kites are world-renowned. Quality and durability are pushed to the highest level with all materials chosen for longevity and performance. We order all Ozone products direct from the factory, which means that prices are kept to the absolute minimum for you.

Handles Package Includes: All the above plus 20m x 180kg/110kg Dyneema flying lines, quad handles with kite killers & strop line.

Warning: The larger sizes pull hard in strong winds. Always read the manual included before use.

Don't forget, give us a call to see what our best price is!