New Products

Chikara Ripstop Nylon 41g/m²
1st quality, crisp, light weight cloth at aproximately 115cm wide, suitable for general purpose and high spec applications. Probably the most used material in kite building. Flexifoil have been using this cloth exclusivly ever since they first released the Blade Mk1. The fabric is made of nylon and double sided coated, so it is very good water repellent. It is very strong and doesn't tear easily at a relative low weight (about 41 grams). The fabric feels soft and the square structure is very visible (5 x 5 mm)

Because of the huge colour range, we currently order in Chikara specifically for each customer, delivery times are naturally a little longer. Usually 4-5 day lead times on Chikara

All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a piece of cloth measuring 100cm x 153cm, 15m of purchased fabric will buy a piece of cloth 15m x 153cm.

Best Sellers

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £5.60
3 = £15.99
10 = £48.99

6mm x 1m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £8.40
3 = £23.99
10 = £74.99

6mm x 1.5m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

1st Quality Ripstop Nylon

Please contact us for colours swatches.

Roll width 153cm..

Mirai Ripstop Nylon 48g/m² - 1st quality, crisp, light weight cloth at aproximately 153cm wide, suitable for general purpose and high spec applications. Mirai is the choice of the famous Peter Lynn Kites and has had many years of astounding success All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a peice of cloth measuring 100cm x 153cm

Ozone- Imp III Trainer

The Highwaymen eShop | Power Kites | Dual Line Power Kites | Ozone- Imp III Trainer

Ozone Imp Trainer 2009

Versatile power kite with bar control system

Whatever your age or kiting ambitions, Ozone's Imp range has the perfect power kite to get you started in the most exciting new sport on the planet. Following the tremendous success with the original Imp, Ozone's designers re-worked it to produce three Imp products: the Imp III Classic, the Imp III Trainer and the Imp III Quattro. All the kites in the range have incredible stability, direct handling and fly perfectly across a wide wind window in light or strong winds.

The Imp Trainer is supplied with a bar control system and 3-line set up. With this clever and user-friendly system, the kite is incredibly safe and easy to use and re-launch without any line tangles. Designed to bring out the kite-surfer within everyone, the Imp Trainer is a perfect teaching tool for anyone thinking of progressing into land-board, kite-surf and snow traction. The Trainer is responsive, smooth and stable with just enough power to ensure you will be ready to progress to the next level.

Ozone's unique 3-line set up with safety leash guarantees safe, easy recovery and pack away. The 3rd line acts as a brake and connects the bridle at the trailing edge of the kite to a wrist safety leash at the control bar. When the control bar is released, the kite remains attached to the safety leash allowing a clean, safe stall without spins or line tangles. The kite is ready to re-launch or even reverse-launched easily without any fuss or frustration.

For 2009, the Imp range follows the stunning sail layout of the Flows, and De-Power kites. Available in three sizes, We recommend the 2.5 m for the best balance of performance and power - go smaller in high wind locations and bigger in light wind areas.

All Ozone kites are manufactured in Ozone's factory in Vietnam and built to the same exacting standards for which their World-class paragliders and technical power kites are world-renowned. Quality and durability are pushed to the highest level with all materials chosen for longevity and performance. We order all Ozone products direct from the factory, which means that prices are kept to the absolute minimum for you.

Includes: Kite, 18m x 180kg Dyneema flying lines, bar with 3rd line safety system, bag, manual & sticker

Warning: The larger sizes can pull hard in strong winds. Always read the manual included before use.

tick

Handle and Bag

The Highwaymen eShop > Power Kites > Dual Line Power Kites > Ozone- Imp III Trainer

Product Sections

Store Information

New Products

Best Sellers

Ozone- Imp III Trainer

Ozone Imp Trainer 2009

tick

Handle and Bag

Imp Trainer (Green) - 1.5sq.m.

Price: £114.82 (Including VAT at 20%)

Imp Trainer (Red)- 2.5sq.m.

Price: £147.16 (Including VAT at 20%)

Imp Trainer (Orange)- 3.5sq.m.

Price: £169.80 (Including VAT at 20%)