|  | What's New?
All the new snow kites in the 2008 range now require 50% less effort to stall the kite for landing, which equals for easier and safer kiting. The Manta II launches easily, has huge de-power, light handling, easy to land, rock solid stability and the finest components and foolproof safety systems available.
Features
Huge de-power range - Double pulley speed system provides amazing progressive power increase ability with gust spilling de-power and lighter bar pressure.
New brake fan design to ensure a cleaner and easier landing stall
Clean aerodynamic profile - No wrinkles, perfection in manufacture and design.
Highest grade materials used throughout the kite and bar system to certified paraglider standards and bullet proof re-enforcement in high stress areas.
Fast turning with constant power.
Open celled de-power foil - No Hassles launching or landing in light or strong winds.
Technical backcountry mountain backpack with room for 2 kites.
Simple and easy to launch or land without assistance - Just unwind and GO.
Perfect bar pressure with direct and responsive handling producing insane POP.
"Butt hole" - Velcro opening in outside cells to allow easy removal of debris.
Sleeved bridles (Un-sleeved bridles stretch and snow/ice forms creating problems).
Quality Assured
All kites manufactured at Ozone's own factory with total control over every aspect of the manufacturing process.
Manufactured, tested and inspected to the very highest certified paraglider standards for maximum performance, quality and safety.
Thousands of hours of development, from CAD design through to riding in extremes at -40 0 C in Norway to the baking heat and sand blasts of Chile.
Quality and durability pushed to the highest levels. All materials selected for longevity and performance. The materials used are the best available for the job.
High tenacity Ozone 40D ripstop nylon sail, with bullet-proof reinforcement in high stress areas.
Leading edges Mylar taped for a rigid, clean and efficient aerofoil, and absolutely no stretching. The Mylar tape effectively locks the sail shape, and maintains factory trim. For the trailing edge the seam is rolled twice and stitched to give a soft and clean exit for the airflow.
Double-needle stitched with UV-bonded thread for maximum strength, durability and a longer life. Every seam is checked to within 0.5 mm; a look at the colour scheme accuracy and the inside of the seams of our kites will highlight this fact.
Bridle attachment tabs are sewn deep into the reinforcement area of the ribs, which means that the load is spread over a larger area of material, thus reducing any stretching and ageing of the cloth.
Bridle designed using least line possible to minimise drag and weight. Highest quality Dyneema lines are stitched for extra strength and less drag and also to prevent tangles or snagging.
Ozone's heat-treated Edelrid Dyneema SK75 flying lines are tested to 300/300kg to ensure stretch resistance, a high thermal tolerance and durability for all kites. Lines are cut, pre-stretched, sleeved and stitched to ensure 100% accuracy. The lines are final load tested to 60% of their breaking strain to "lock" the line.
Colour-coded and labelled line connection system makes set-up safer and stress-free for riders new to kiting.
'Butt hole' Velcro opening in outside cells to allow easy removal of debris.
Huge de-power range - speed system provides amazing progressive power increase ability with gust spilling de-power.
Warning:
Although this kite is suitable for all experience levels, the larger sizes generate a lot of pull in strong winds. We recommend that beginners start with a smaller size kite, and only progress to the larger sizes when fully competent. Only use the large sizes in lighter wind conditions. Always read the manual included before use. |
| | | | Control System
Ozone have been leading the industry since launching the original Frenzy in 2002, and have remained at the forefront of the snow-kite revolution ever since. The leash-less re-ride safety release, first introduced in 2005, meant that riders did not need a leash to stay connected to the kite in an emergency.
The easy to grab handle, that is just as easy to re-connect, allows riders to rapidly stall or land the kite when they need to, and spin as many times as they like without any hassle or tangles.
Manufactured to the very highest certified paraglider standards, using the finest Amsteel spectra leaders, speed systems and pulleys available.
Bar System Features
Clamcleat Trimmer - reliable and smooth
Composite bar & bar ends load tested to 300kg
Colour coded EVA foam bar grip
The original RE-RIDE leash-less safety system
Easy to grab stall/brake handle
Ronstan 300kg pulley with backup stainless ring
Wear-proof chicken loop line by "BEAL"
Colour coded SK75 25m red flying lines
Line labels for foolproof line connection |  |
| |  | Megatron Chickenloop
New moulded chicken-loop design (used on Access XC, Frenzy FX and Manta II).
Easy to operate, wide mouth for hooking in our out easily.
Passes requirements for the AFNOR EU Norms for Chicken-loop releases in emergency situations.
Top handle spins for easy line un-tangling.
Suicide leash attachment.
Fits into bar for perfect connection (male to female).
Foolproof release system and easy to reconnect with one hand.
Beal line for chick loop line - never wears out (but is replaceable in case of failure by accident). |
| | Frenzy FX and Manta II Bar Horns
New Bar (Manta II and FX only) with composite Horns with EVA foam. The new bar ends are comfortable and easy on the arms. Still in composite materials for ultimate strength. Load tested to 350kg.
|  |
| |  Package Includes
Kite
Carbon control bar
Leash-less riding safety system
2x 25m 300kg; 1x 500kg SK75 colour coded Dyneema lines
Larger technical mountain pack
Repair kit
Detailed manual, stickers, and key-ring
| | | | | | | | | |
|
